Bob Derrick's tank badges.

James and Francis Barnett tank badges are now available.

In 30 years working with James motorcycles these are the items that have been most frequently asked for and they have been impossible to source.

The same has been the case for the Francis Barnett badges.

The are now available from Bob Derrick of Classic Transfers, who can also supply all types of James and Francis Barnett transfers (decals)

Contact Bob at
PO Box 17, Wotton-Under-Edge, Glos. GL12 8YX U.K.

Email: service@classictransfers.co.uk

Tel/Fax: +(44) 1454 260596

www.classictransfers.co.uk

Note from Classic Transfers

Our domed badges are inset into the rubber discs, screw holes pre drilled
and ready to screw directly onto your tank. (Screws not supplied). They have
a plain aluminium domed spacer between the badge and rubber which gives
added strength and ensure that the front of the badge is flush with the face
of the rubber.

These are 2.375 inch dia with hole centres at 2.0625 inch.

These are GBP £40.00 pair including the rubber surrounds.
P & P for Britain is GBP £1.50 per pair. For overseas please enquire.

We have endeavoured to make these as near to the original design as
practically possible. The originals were injection moulded with the back of
the badge in relief with the colours applied as a secondary process.

To produce these today in the same manner would be prohibitively expensive
with regard to tooling and reverse printing costs. The originals being
plastic tended to crack in the vicinity of the holes of the fixing screws
were overtightened.